Which Table Saw Fence Indicator is Right for You: The Ultimate Guide

Table saws have a variety of different fence indicators that are designed to help you keep your fence aligned with the blade. Which Table Saw Fence Indicator is right for you? It’s important to make sure your table saw stays properly aligned, and if not, it could lead to serious injury or worse!

The best table saw alignment gauge will be determined by a few factors- how often do you need to change the angle of the blade, what type of material are you cutting.

how many people use your table saw on a regular basis- so let’s take a look at some of these options.

Sight Gauge: This is a bit more of an old fashioned fence indicator that can work well for those who only need to make adjustments every once in awhile. The two parts are aligned by looking through the small hole and lining up the blade with it’s three lines. It works best when you have plenty of space on either side of the blade.

Tilt Gauge: Another option that is a bit more old school, this gauge requires you to set the angle of your table saw by aligning it with the long lines and then adjusting it on either side using screws. It’s best for those who want precise adjustments but don’t feel like getting their hands too dirty!

Fence Plate: Ideal for use when cutting large pieces of material or if multiple people are using the table saw at once, a fence plate can be adjusted in any direction as needed without having to move anything around on your work surface.

woodsawtoolTable Saw Fence Indicator :The Ultimate Guide


The most important thing about selecting which type of tool works well?

The most important thing about selecting which type of tool works well? How can you tell if a table saw fence is square? How can you tell if a table saw fence is square?

How can you tell if a table saw fence is square? There are two types of guides, the table-mounted type and the fence mounted type. Table top tools are commonly used for smaller projects with less accuracy, while larger scale use requires something more precise like the fence mounted variety.

The best way to know what style will fit your needs the best is by asking yourself some questions: What kind of work do I need it to be able to handle?

Do I want an analog or digital gauge ? Will this guide help in my production process or just during one job?

Table mounted guides are best for any table saw fence that is not too large or if you don’t need to be able to measure anything more than one inch in height. Advantages include its low cost and easy installation, but the drawback is inaccurate readings. If accuracy isn’t a concern then this guide will work well with your table saw fence .

You may like to read:
6 Best Table Saw for Beginners : Top Picks & Reviews [2021]

Fence mounted guides are used when it needs to be accurate on every job, no matter how big of an undertaking they may be. The downside is high price tags which can go as high  (depending on brand).

However you should also take into account how much use these gauges get since their lifespan averages out after about two to three years.


Table saw fence indicator set (30” and 60”)

The advantage of this system is that it’s a two-in-one deal – not only does the alignment gauge work but the parallels are also taken care of at the same time, saving you both money and space!

The downside is limited use since they’re best for large jobs which mean these need to be used on more permanent workspaces .

It doesn’t require any tools or assembly so installation takes just minutes – making them perfect if you don’t have much experience with table saws before.

However, some people may find that their accuracy isn’t as accurate as others when installed correctly.


Fence mounted guides

A table saw fence for an accurate cut is a must-have, and the best one can be found with these six pointers. Keep in mind that not all fences are created equal – so your choice will depend largely on the type of projects you work on most often .

No matter what size job or material being used, it’s important to have your table saw cutting straight lines – this means choosing the right alignment gauge!

The three main types: magnetic strips, laser indicators, and traditional parallels (which should only be used by experienced professionals) each offer their own set of pros and cons when aligning blade with wood but today we’ll focus strictly on finding which option suits you best.

woodsawtoolTable Saw Fence Indicator : Doesn’t Have To Be Hard. Read These


woodsawtoolTraditional Alignment

When aligning blade with wood but today we’ll focus strictly on finding which option suits you best.


– Easy to use – Just line up the blade with your mark and you’re good to go!

– Provides a lot of precision when cutting  – The added weight on one end means that there’s less pressure applied per square inch, which provides more accuracy


– Only able to be used by those who are experienced table saw users. While it can work for newbies too, mistakes made while using this option could lead to serious injury or worse. For best results please consult an expert first before attempting it on your own.)

woodsawtoolTable Saw Fence Indicator: Which One Do You Need?

You might not know this but there are different types of table saws out there with their own unique features.

The type of table saw will determine which style of fence indicator would work best for you in particular as they vary greatly depending on what kind of project(s) you’re going after or what level accuracy you need from them.

Below we’ll break down each one so that you can find the one that best suits your needs.

Magnetic: This type of indicator is comprised of a magnet and a steel plate with an arrowhead on it which will point to where you need to position your wood when cutting.

The magnetic table saw fence indicator works by attaching the metal strip onto the face side of a miter gauge or any wider board, making sure they are even with each other then placing them against the front edge of your blade;

this will allow for two rails (one on either side) to guide your hands as you cut across in order to get accurate measurements every time!


Laser: A laser table saw fence has a sensor lens mounted underneath it, usually at eye level so that it’s easier to line up the laser dot with your work piece. It also has a clamping system to attach it to your table saw’s fence and measure distances from the blade, making for an accurate cut every time!

woodsawtoolWhat’s the best table saw fence indicator for you?

The magnetic strips alignment gauge is a convenient and easy option. It offers high precision and it doesn’t require any drilling of materials to use, making it perfect for those who have never used one before or want an easier way than traditional parallel.

The added weight on one end means that there’s less pressure applied per square inch, which provides more accuracy.

Cons: requires drilling into every side of wood being cut if not using has higher chance at error causing injury as well as damage to your workpiece.

If looking for something with less risk this may not be the right choice but otherwise very good!

Magnetic Strips Alignment Gauge

Pros: Easily attachable to most materials without drilling, lightweight for easy carrying and storage.

Cons: requires a lot of measuring in order to get accurate alignment as well as being prone to errors from slipping or the stick coming loose.

Plumb Lines Pros: very straight forward usage- simply draw your cut line with chalk and then place plumber’s level on opposite side of material Cons: not always accurate enough for precision work such as cabinet building) )

Pivot Gauge Pro: Receive instant feedback if saw is at an angle, does not require any measurements but can be made inaccurate by vibrations that cause it to move off its mark(This is why they’re often used with some kind of clamping mechanism).

woodsawtoolFrequently Asked Questions (F.A.Q)

How do you use a dial indicator on a table saw?

If you can’t get it close enough, try again at a different position on the blade and adjust for that new offset (or loosen one of the screws on your mag base). The best cheap way to measure runout in a table saw is by using a dial indicator mounted near its edge with an accuracy rating of .01″.

zero out dial indicator then rotate blade manually without power until lowest number registers as absolute value nearest to zero which should be equal to or under half (.005) digit readability (.001″) allowable tolerance standard in most industries such as engineering and machine shops.

put on safety goggles, long sleeved shirt (to protect skin), gloves, hearing protection  and stand behind table saw with hands at side of body when rotating blade like steering wheel around the track

make sure there is no one standing directly below you so that they are not injured if a piece were to fall off during testing. If necessary, ask someone else nearby who knows what’s going on for help holding this block up while you test crosscut alignment (see video).

What is the fencing on a table saw?

A table saw fence indicator is a gauge which, when placed on the blade track of your table saw’s rip fence, will tell you if there is any play in the alignment.

The accuracy of this test is dependent on how accurately you place it on the blade track and also your ability to note whether or not there are differences between what you see from one side to another.

There should be no movement left-to-right within about an inch either way (left to right, front to back). If so, adjust your workpiece until that happens. To figure out where best for the fencing itself would be located, use our Table Saw Fence Alignment chart below!

What kind of table saw fence can fit my needs?

– Table saw fences come in two main varieties, T Track and Miter Gauge. If you’re wondering which one is best for your project, well there’s a simple answer: it depends on what you need!

The T track will work with any style table saw while the miter gauge will only work with a few models. Before purchasing either type, make sure to measure your current table length and find out if they would be compatible before buying.

– Know that some table saws are sold without rails or other mounting hardware so double check how these add ons may affect your decision as well! For example, Delta has an option to buy their products

Should table saw fence be parallel to blade?

Yes, table saw fence should be parallel to the blade. This will ensure that you are ripping with a perfectly straight edge and make sure that your cuts remain uniformed in width throughout the length of your cut.

The only time this rule should be broken is when cutting dados or miters because they require angled edges for which there is no table saw fence indicator on the market designed specifically for this type of operation.”

How do I make my table saw fence accurate?

There are two ways:

You can level your table saw by adjusting the front and rear leg sets. This will not only give you a more accurate cutting surface, but it’ll also reduce vibration to help prevent blade chatter or kickback. It should be done with care because leveling your table is an adjustment that shouldn’t be made lightly

– The other option is to adjust the fence itself so that its parallel to the blades teeth.”


Dadoes; What’s That All About?

A dado is a joint cut into two pieces of wood so as to form an interlocking shape – typically rectangular when viewed along end grain. This technique was developed centuries ago because it makes possible joinery without using nails or screws.-It is used most often today How do I adjust my table saw?

What do I need in a table saw fence indicator?

A good rule of thumb when buying one is having two inches wide cut will be accurate enough even for fine work. Making sure there’s an adjustable bar with magnetic metal surfaces on each side of the blade.



Table saw fence indicators are extremely helpful in preventing injuries when you Considering that table saw fence indicators help to ensure accurate cuts, and can also prevent accidents when well maintained; this is a very important equipment for woodworkers. With the wide variety of designs available on the market today we should design our own!

Leave a Comment